Most Electrolux washer repairs in Edgewood involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Edgewood, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Washer Technicians, Edgewood MD
We found 40 appliance repair companies within 30 miles of Edgewood. 1 of them are based in Edgewood itself, and the rest are spread across Baltimore (16), Bel Air (5), and Parkville (4). The farthest listed company is about 20 miles out. Harford Appliance Repair Service is the nearest, roughly 1.7 miles from Edgewood. No company within 90 miles of Edgewood mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 36 rated companies, the average public rating is 4.1 stars.
Companies are shown by relevance and distance from Edgewood. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 22 |
| Distance to the three closest (mi) | 1.7, 3.2, 4.3 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 34 |
| Mention washer work | 16 |
First up for Edgewood: Landers Appliance (12.0 miles away, based in Baltimore, 4.9 stars from 2,398 reviews); Mr. Appliance of Bel Air (5.6 miles away, based in Bel Air, 4.7 stars from 467 reviews, lists Saturday hours); All-Star Appliance Repair Baltimore (19.7 miles away, based in Baltimore, 4.7 stars from 1,459 reviews, lists Saturday hours); Sears Appliance Repair (9.6 miles away, based in Baltimore, 4.5 stars from 869 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
What Electrolux Says to Check First
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
When to Call for Electrolux Washer Repair
- Loud banging, shaking or walking during the spin
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- Any error code shown on the display
Around Edgewood
Most washer calls in Edgewood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Edgewood
- Can you give a written estimate before ordering parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Edgewood, MD
Why is my washer leaking?
How do I get rid of a washer mildew smell?
Which Edgewood technicians work on Electrolux?
Is my Electrolux washer worth repairing?
Other Washer Repair in Edgewood
Electrolux Washer Repair in Nearby Cities
Also Serving Towns Around Edgewood
The technicians listed for Edgewood also cover smaller towns nearby, including Chestertown. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.