Electrolux owners in Easton usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Easton, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Easton
We found 13 appliance repair companies within 30 miles of Easton. 2 of them are based in Easton itself, and other nearby bases include Edgewater (3), Annapolis (2), and Preston (1). The farthest listed company is about 30 miles out. Tom's Appliance Services is the nearest, roughly 0.4 miles from Easton. No company within 90 miles of Easton mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 13 rated companies, the average public rating is 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.4, 0.8, 10.1 |
|---|---|
| Companies within 30 miles | 13 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 5 |
| Rated 4.5 stars or higher (10+ reviews) | 7 |
| Name washers or washing machines in their listing | 6 |
Closest matches for Easton: Sears Appliance Repair (0.8 miles away, 4.3 stars from 133 reviews, lists Saturday hours); Appliance Guys (28.4 miles away, based in Edgewater, 4.6 stars from 83 reviews); Mr. Appliance of Annapolis (27.5 miles away, based in Annapolis, 4.7 stars from 492 reviews); Maryland Appliance Repair LLC (10.1 miles away, based in Preston, 4.9 stars from 150 reviews).
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Common Electrolux Washer Problems
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Signs Your Electrolux Washer Needs a Technician
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Easton
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Local Notes for Easton
Most washer calls in Easton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Before You Book in Easton
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Easton, MD
Do you work for Electrolux?
Should I repair or replace my Electrolux washer?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Easton, MD
Electrolux Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.