If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Beltsville list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Beltsville
40 repair companies serve Beltsville from within 30 miles. 3 of them are based in Beltsville itself, and the rest are spread across Silver Spring (12), Laurel (6), and Hyattsville (4). Distances run up to about 7 miles. No company within 90 miles of Beltsville mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. EMR - Commercial Kitchen Service, Parts, Installation is the nearest, roughly 1.0 miles from Beltsville. Across 35 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Beltsville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 60 |
|---|---|
| Mention washer work | 6 |
| Mention Electrolux | 0 |
| Open on Saturdays (per listing) | 40 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Three nearest companies, miles away | 1.0, 1.0, 2.2 |
First up for Beltsville: TruFix Appliance Repair & Services, LLC (6.7 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Sears Appliance Repair (6.0 miles away, based in Hyattsville, 4.4 stars from 398 reviews, lists Saturday hours); Power Tech Appliance Service (4.8 miles away, based in Laurel, 4.1 stars from 42 reviews, lists Saturday hours); Sears Appliance Repair (3.6 miles away, based in Silver Spring, 4.0 stars from 1,337 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
When to Call for Electrolux Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Water left in the drum after the cycle
What Gets Fixed on a Beltsville Washer Call
Care Electrolux Recommends for Its Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around Beltsville
Most washer calls in Beltsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Beltsville
- What guarantee do you give on parts and labor?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
Electrolux Washer Repair FAQs: Beltsville, MD
What stops a washer from spinning?
Do you work for Electrolux?
How do I find a technician who knows Electrolux washers?
More Washing Machine Repair in Beltsville, MD
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.