Electrolux owners in Melbourne usually want two things from a repair company: experience with the brand and quick access to parts. The Melbourne list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Melbourne
Within 30 miles of Melbourne there are 34 appliance repair companies in our data. 7 list an address in Melbourne, and the rest are spread across Palm Bay (10), Merritt Island (5), and Cocoa (5). The farthest listed company is about 30 miles out. Hartman's Appliance Repair Service is the nearest, roughly 0.9 miles from Melbourne. None of the repair companies near Melbourne name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 25 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 13 |
|---|---|
| Distance to the three closest (mi) | 0.9, 1.0, 1.6 |
| Mention washer work | 8 |
| Listing Saturday hours | 19 |
| Companies within 30 miles | 34 |
| Mention Electrolux | 0 |
The leading options for Melbourne are Capritta Appliance & Air Conditioning (2.1 miles away, based in West Melbourne, 4.9 stars from 1,976 reviews, lists Saturday hours); RMJP Appliance Repair (8.6 miles away, based in Palm Bay, 4.9 stars from 130 reviews, lists Saturday hours); Mr. Appliance of Melbourne (8.4 miles away, 4.7 stars from 395 reviews); Sears Appliance Repair (17.1 miles away, based in Merritt Island, 4.6 stars from 638 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
What Electrolux Says to Check First
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Signs Your Electrolux Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Melbourne
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Melbourne
Most washer calls in Melbourne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
How to Choose a Washing Machine Technician Near Melbourne
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Melbourne, FL
Where is the water under my washer coming from?
Why does my Electrolux washer show an error code?
Which Melbourne technicians work on Electrolux?
Related Repair Pages for Melbourne
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.