A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Fort Payne list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Electrolux Washer Repair Near Fort Payne
40 repair companies serve Fort Payne from within 60 miles. 4 list an address in Fort Payne, and other nearby bases include Rome (8), Dalton (5), and Chattanooga (3). The farthest listed company is about 49 miles out. None of the repair companies near Fort Payne name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Sears Appliance Repair, about 1.0 miles away. Across 36 rated companies, the average public rating is 4.0 stars. Fort Payne is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 12 |
|---|---|
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Distance to the three closest (mi) | 1.0, 1.2, 1.6 |
| Companies within 60 miles | 60 |
| Listing Saturday hours | 31 |
At the top of the Fort Payne list: Sears Appliance Repair (1.0 miles away, 4.3 stars from 4 reviews, lists Saturday hours); Thurman's Appliances Parts Service (1.6 miles away, 4.7 stars from 32 reviews); Masters Appliance Heating & Air (48.1 miles away, based in Chattanooga, 4.8 stars from 149 reviews); Sears Appliance Repair (42.5 miles away, based in Fort Oglethorpe, 4.4 stars from 136 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines Technicians Work On
What Makes Electrolux Washer Repairs Different
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Common Electrolux Washer Problems
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Electrolux Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
What Gets Fixed on a Fort Payne Washer Call
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
What Fort Payne Owners Should Know
Most washer calls in Fort Payne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
In Alabama, you can check a license with the Alabama Plumbers and Gas Fitters Examining Board Individual Licensee Search or report a problem to the Alabama Attorney General's Office, Consumer Interest Division.
How to Choose a Washing Machine Technician Near Fort Payne
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Fort Payne, AL
Do you work for Electrolux?
What should I do about a Electrolux error code?
Is my Electrolux washer worth repairing?
Why is my washer leaking?
More Washing Machine Repair in Fort Payne, AL
Electrolux Washer Repair Near Fort Payne
Also Serving Towns Around Fort Payne
The technicians listed for Fort Payne also cover smaller towns nearby, including Rainsville. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.