If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Gig Harbor list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Gig Harbor
Our data shows 40 appliance repair companies inside a 30-mile radius of Gig Harbor. Other nearby bases include Tacoma (12), Federal Way (6), and Bremerton (6). The farthest listed company is about 17 miles out. None of the repair companies near Gig Harbor name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Renvoriq Appliance Repair Tacoma, about 7.1 miles away. The 21 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Amana | 0 |
|---|---|
| Name washers or washing machines in their listing | 10 |
| Three nearest companies, miles away | 7.1, 7.2, 8.1 |
| Open on Saturdays (per listing) | 35 |
| Rated 4.5 stars or higher (10+ reviews) | 15 |
| Companies within 30 miles | 60 |
First up for Gig Harbor: HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (10.7 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); FIX UFA Appliance Repair (14.5 miles away, based in Tacoma, 4.5 stars from 76 reviews); Leon's Luxury repair & installation (12.7 miles away, based in Tacoma, 4.7 stars from 51 reviews); A&H Appliance and Home services (11.9 miles away, based in Federal Way, 4.9 stars from 35 reviews, lists Saturday hours).
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
The Amana Dual Action Agitator top loader is belt-driven by a 1/4 HP motor. Source: Whirlpool Corporation - Amana 3.5 cu. ft. Top-Load Washer with Dual Action Agitator (NTW4516FW)
What Amana Says to Check First
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
When to Call for Amana Washer Repair
- An error code on the display
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Care Amana Recommends for Its Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Gig Harbor
Most washer calls in Gig Harbor come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Gig Harbor
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
Amana Washer Repair FAQs: Gig Harbor, WA
Why is my washer leaking?
Is this Amana customer service?
What stops a washer from spinning?
Related Repair Pages for Gig Harbor
Amana Washer Repair in Nearby Cities
Amana Washer Repair for Towns Near Gig Harbor
The technicians listed for Gig Harbor also cover smaller towns nearby, including Maplewood. If you are in one of them, the companies above are your closest Amana washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.