If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Texas City list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Texas City
Within 30 miles of Texas City there are 40 appliance repair companies in our data. Other nearby bases include Pasadena (12), League City (6), and Friendswood (3). The farthest listed company is about 24 miles out. Tim Schlageter AA Apliance is the nearest, roughly 2.6 miles from Texas City. None of the repair companies near Texas City name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 39 businesses.
Companies are shown by relevance and distance from Texas City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Amana | 0 |
|---|---|
| Three nearest companies, miles away | 2.6, 3.0, 6.0 |
| Companies within 30 miles | 58 |
| Open on Saturdays (per listing) | 44 |
| Mention washer work | 20 |
| With 4.5+ stars and at least 10 reviews | 22 |
At the top of the Texas City list: Sears Appliance Repair (8.7 miles away, based in League City, 4.5 stars from 280 reviews, lists Saturday hours); Mr. Appliance of Deer Park (21.8 miles away, based in Pasadena, 4.8 stars from 190 reviews, lists Saturday hours); Mr. Appliance of League City (16.3 miles away, based in Friendswood, 4.8 stars from 765 reviews, lists Saturday hours); Dial Viking Appliance Repair (3.0 miles away, based in La Marque, 4.6 stars from 25 reviews, lists Saturday hours).
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
When to Call for Amana Washer Repair
- Water on the floor under or in front of the washer
- An error code on the display
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Texas City Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Texas City, TX
Most washer calls in Texas City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Texas City Washer Technician
- How often do you repair Amana washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Amana Washer Repair FAQs: Texas City, TX
Which Texas City technicians work on Amana?
Why is my washer leaking?
What should I do about a Amana error code?
What stops a washer from spinning?
Other Washer Repair in Texas City
More Amana Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.