If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving North Bellport, with those that mention Amana first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near North Bellport
Within 30 miles of North Bellport there are 40 appliance repair companies in our data. The rest are spread across Bohemia (5), Holbrook (4), and Holtsville (3). No company within 90 miles of North Bellport mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Williston Repair Group, about 2.9 miles away. The 29 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 4 |
|---|---|
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Mention Amana | 0 |
| Listing Saturday hours | 40 |
| Distance to the three closest (mi) | 2.9, 3.0, 3.9 |
The leading options for North Bellport are Island Wide Appliance (4.5 miles away, based in Patchogue, 4.5 stars from 322 reviews); Sears Appliance Repair (7.9 miles away, based in Bohemia, 4.5 stars from 269 reviews, lists Saturday hours); EASTERN GRILLS LLC - BBQ Grill (4.3 miles away, based in Medford, 5.0 stars from 365 reviews, lists Saturday hours); LJ Appliance Repair Service (8.2 miles away, based in Ridge, 4.6 stars from 22 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
What Amana Says to Check First
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- An error code on the display
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in North Bellport
Keeping a Amana Washer Running
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- How old the washer is
Laundry Notes for North Bellport, NY
Most washer calls in North Bellport come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
How to Choose a Washing Machine Technician Near North Bellport
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
- Will you check the drain pump filter and drain hose before replacing the pump?
Amana Washer Repair FAQs: North Bellport, NY
Why does my front-load washer smell?
Is this Amana customer service?
Why does my Amana washer show an error code?
Other Washer Repair in North Bellport
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.