A Amana washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Amana Washer Repair Near Murraysville
15 repair companies serve Murraysville from within 30 miles. Other nearby bases include Wilmington (11), Rocky Point (1), and Navassa (1). Nearest on the list: Two Guys in a Van Home Repair, around 2.1 miles out. None of the repair companies near Murraysville name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 14 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Murraysville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 15 |
|---|---|
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Three nearest companies, miles away | 2.1, 2.7, 2.8 |
| Name washers or washing machines in their listing | 3 |
| Open on Saturdays (per listing) | 6 |
At the top of the Murraysville list: Mr. Appliance of Wilmington NC (3.3 miles away, based in Wilmington, 4.8 stars from 1,215 reviews); Appliance Service Co (8.4 miles away, based in Wilmington, 4.7 stars from 240 reviews); Jamerson Appliance Repair (28.0 miles away, based in Southport, 4.9 stars from 830 reviews); Pro-Serv Food Equipment (2.8 miles away, based in Wilmington, 5.0 stars from 12 reviews, lists Saturday hours).
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Keeping a Amana Washer Running
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Murraysville
Most washer calls in Murraysville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Murraysville
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Murraysville, NC
Is my Amana washer worth repairing?
Which Murraysville technicians work on Amana?
Why does my Amana washer show an error code?
Why won't my washer spin?
Other Washer Repair in Murraysville
Amana Washer Repair in Nearby Cities
Also Serving Towns Around Murraysville
The technicians listed for Murraysville also cover smaller towns nearby, including Kings Grant, Ogden, Porters Neck, and Hampstead. If you are in one of them, the companies above are your closest Amana washer repair options, and our helpline covers you too.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.