If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Huntersville, with those that mention Amana first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Huntersville NC
Within 30 miles of Huntersville there are 40 appliance repair companies in our data. 6 of them are based in Huntersville itself, and other nearby bases include Charlotte (14), Mooresville (7), and Cornelius (4). The farthest listed company is about 14 miles out. None of the repair companies near Huntersville name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Top Huntersville Appliance Repair, around 0.4 miles out. Across 35 rated companies, the average public rating is 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention washer work | 22 |
|---|---|
| Listing Saturday hours | 44 |
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Three nearest companies, miles away | 0.4, 0.5, 0.7 |
| Appliance repair companies in range (30 mi) | 60 |
Closest matches for Huntersville: CLT Appliance Repair, LLC (12.9 miles away, based in Charlotte, 4.9 stars from 682 reviews, lists Saturday hours); Quick Reliable Appliance Repair, LLC (2.6 miles away, 4.7 stars from 182 reviews, lists Saturday hours); LKN Appliance Repair (10.2 miles away, based in Denver, 5.0 stars from 97 reviews, lists Saturday hours); SmartFix Appliance Repair (7.3 miles away, based in Charlotte, 4.9 stars from 1,197 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
How Amana Washers Are Built
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
Amana Washer Error Codes
| Code | What it means |
|---|---|
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
- An error code on the display
How a Washer Service Call Usually Goes in Huntersville
Keeping a Amana Washer Running
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Huntersville Owners Should Know
Charlotte Water, which supplies Huntersville, reports hardness of total hardness averages about 32 mg/L as CaCO3 (range 27-35 mg/L), soft water. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Charlotte Water 2025 Consumer Confidence Report
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Huntersville
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Amana Washer Repair FAQs: Huntersville, NC
Should I repair or replace my Amana washer?
What stops a washer from spinning?
Why is my washer leaking?
Why does my Amana washer show an error code?
More Washing Machine Repair in Huntersville, NC
More Amana Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.