Most Amana washer repairs in Clinton involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Clinton
Our data shows 37 appliance repair companies inside a 30-mile radius of Clinton. The rest are spread across Jackson (20), Brandon (6), and Pearl (4). The farthest listed company is about 24 miles out. No company within 90 miles of Clinton mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Superior Appliance Repair Service, about 5.7 miles away. Across 36 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 19 |
|---|---|
| Mention washer work | 2 |
| Three nearest companies, miles away | 5.7, 6.1, 7.2 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention Amana | 0 |
| Companies within 30 miles | 37 |
The leading options for Clinton are Mr. Appliance of Madison (14.3 miles away, based in Madison, 4.5 stars from 179 reviews); Sears Appliance Repair (12.8 miles away, based in Ridgeland, 4.1 stars from 321 reviews, lists Saturday hours); Brothers Appliance Repair Solutions. (6.1 miles away, based in Jackson, 5.0 stars from 5 reviews, lists Saturday hours); Rockford Appliance Repair Fixers (8.7 miles away, based in Jackson, 5.0 stars from 4 reviews).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Amana Washer
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
The Amana Dual Action Agitator top loader is belt-driven by a 1/4 HP motor. Source: Whirlpool Corporation - Amana 3.5 cu. ft. Top-Load Washer with Dual Action Agitator (NTW4516FW)
Amana Washer Symptoms and First Checks
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Clinton
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
What Clinton Owners Should Know
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Mississippi's State Board of Contractors has no appliance repair classification; it licenses mechanical, HVAC and plumbing contractors, with residential mechanical and plumbing subcontractors required to hold a license. Source: MSBOC: Classifications
In Mississippi, you can check a license with the MSBOC Check A License or report a problem to the Mississippi Attorney General's Office, Consumer Protection Division.
Questions to Ask a Clinton Washer Technician
- What guarantee do you give on parts and labor?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Clinton, MS
Do you work for Amana?
How do I find a technician who knows Amana washers?
What should I do about a Amana error code?
More Washing Machine Repair in Clinton, MS
Amana Washer Repair Near Clinton
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.