If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Washer Repair Near Creve Coeur
We found 40 appliance repair companies within 30 miles of Creve Coeur. Other nearby bases include St. Louis (15), St Charles (3), and Hazelwood (3). The farthest listed company is about 12 miles out. None of the repair companies near Creve Coeur name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Hoffmann Brothers, around 2.5 miles out. The 29 rated companies in range average 4.2 stars.
Companies are shown by relevance and distance from Creve Coeur. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 43 |
|---|---|
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Distance to the three closest (mi) | 2.5, 3.1, 4.1 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention washer work | 12 |
Closest matches for Creve Coeur: Mr. Appliance of Greater St. Louis (5.2 miles away, based in Ballwin, 4.8 stars from 1,345 reviews, lists Saturday hours); All American Appliance and HVAC Services (5.8 miles away, based in St. Louis, 4.7 stars from 2,771 reviews, lists Saturday hours); P.A.C.E. Appliance Repair (9.3 miles away, based in St Charles, 4.9 stars from 423 reviews); Hoffmann Brothers (6.1 miles away, based in Brentwood, 4.9 stars from 11,938 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Amana Washer
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Amana Washer Error Codes
| Code | What it means |
|---|---|
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
When to Call for Amana Washer Repair
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Creve Coeur Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
What Amana Washer Repairs Cost
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Creve Coeur
Most washer calls in Creve Coeur come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Before You Book in Creve Coeur
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Amana Washer Repair FAQs: Creve Coeur, MO
Do you work for Amana?
Where is the water under my washer coming from?
How do I find a technician who knows Amana washers?
Why does my Amana washer show an error code?
Related Repair Pages for Creve Coeur
Amana Washer Repair Near Creve Coeur
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Creve Coeur technician bring the right parts.