Amana owners in Victoria usually want two things from a repair company: experience with the brand and quick access to parts. The Victoria list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Washers Near Victoria
We found 40 appliance repair companies within 30 miles of Victoria. 1 list an address in Victoria, and other nearby bases include Eden Prairie (5), Hopkins (5), and Plymouth (4). The farthest listed company is about 19 miles out. The closest is First Choice Appliance Repair, about 0.3 miles away. No company within 90 miles of Victoria mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 23 rated companies in range average 4.5 stars.
Companies are shown by relevance and distance from Victoria. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 17 |
|---|---|
| Distance to the three closest (mi) | 0.3, 5.0, 5.3 |
| Mention Amana | 0 |
| Mention washer work | 8 |
| Open on Saturdays (per listing) | 46 |
| Companies within 30 miles | 60 |
First up for Victoria: AMA Appliance Service (12.1 miles away, based in Hopkins, 5.0 stars from 82 reviews); Appliance Repair Pro (17.7 miles away, based in Savage, 5.0 stars from 500 reviews, lists Saturday hours); Sears Appliance Repair (13.1 miles away, based in Minnetonka, 4.4 stars from 217 reviews, lists Saturday hours); Sears Appliance Repair (11.4 miles away, based in Eden Prairie, 4.5 stars from 124 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
What Makes Amana Washer Repairs Different
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
What Gets Fixed on a Victoria Washer Call
Owner Care for Amana Washers
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
Amana Washer Repair Cost Ranges
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Victoria, MN
Most washer calls in Victoria come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
How to Choose a Washing Machine Technician Near Victoria
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Amana Washer Repair FAQs: Victoria, MN
Why does my Amana washer show an error code?
What stops a washer from spinning?
Is my Amana washer worth repairing?
Related Repair Pages for Victoria
Amana Washer Repair in Nearby Cities
Amana Washer Repair for Towns Near Victoria
Amana washer repair for Mound and Minnetrista is handled by the same companies listed for Victoria. Each town also has its own washing machine repair page with the nearest companies:
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.