Most Amana washer repairs in Allendale involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Allendale list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Washers Near Allendale
We found 40 appliance repair companies within 30 miles of Allendale. The rest are spread across Grand Rapids (8), Muskegon (7), and Holland (5). The farthest listed company is about 29 miles out. No company within 90 miles of Allendale mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Bekins, around 4.8 miles out. Across 39 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Allendale. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 18 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Mention washer work | 10 |
| Distance to the three closest (mi) | 4.8, 6.6, 6.6 |
| Mention Amana | 0 |
| Repair companies inside 30 miles | 40 |
First up for Allendale: Bekins (4.8 miles away, based in Coopersville, 4.8 stars from 131 reviews, lists Saturday hours); Big Lake Appliance Service (10.4 miles away, based in Conklin, 4.8 stars from 237 reviews); UDG Services LLC (25.4 miles away, based in Muskegon, 4.9 stars from 253 reviews); UDG Services LLC (20.2 miles away, based in Holland, 4.9 stars from 242 reviews).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Amana Washer
How Amana Washers Are Built
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Allendale
Keeping a Amana Washer Running
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Repairs Cost
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Allendale Owners Should Know
Most washer calls in Allendale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
How to Choose a Washing Machine Technician Near Allendale
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
- How often do you repair Amana washers, and how quickly can you get parts?
Amana Washer Repair FAQs: Allendale, MI
Why is my washer leaking?
What should I do about a Amana error code?
Why does my front-load washer smell?
Is this Amana customer service?
More Washing Machine Repair in Allendale, MI
Amana Washer Repair Near Allendale
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.