If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Glen Burnie MD
We found 40 appliance repair companies within 30 miles of Glen Burnie. 3 list an address in Glen Burnie, and other nearby bases include Baltimore (14), Crofton (3), and Pasadena (2). None of the repair companies near Glen Burnie name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Gracie Appliance Services is the nearest, roughly 1.1 miles from Glen Burnie. Across 35 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Amana | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 20 |
| Three nearest companies, miles away | 1.1, 1.2, 1.4 |
| Listing Saturday hours | 37 |
| Mention washer work | 13 |
| Appliance repair companies in range (30 mi) | 60 |
First up for Glen Burnie: Landers Appliance (13.8 miles away, based in Baltimore, 4.9 stars from 2,398 reviews); Mr. Appliance of Howard County (13.9 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); Mr. Appliance of Annapolis (13.4 miles away, based in Annapolis, 4.7 stars from 492 reviews); Sears Appliance Repair (1.2 miles away, 4.2 stars from 908 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines Technicians Work On
How Amana Washers Are Built
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Glen Burnie
Care Amana Recommends for Its Washers
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
What Amana Washer Repairs Cost
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Around Glen Burnie
Most washer calls in Glen Burnie come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)
In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Glen Burnie
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Amana Washer Repair FAQs: Glen Burnie, MD
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Do you work for Amana?
How do I find a technician who knows Amana washers?
Related Repair Pages for Glen Burnie
Amana Washer Repair Near Glen Burnie
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.