Most Amana washer repairs in Cutler Bay involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Cutler Bay FL
Our data shows 40 appliance repair companies inside a 30-mile radius of Cutler Bay. 3 of them are based in Cutler Bay itself, and the rest are spread across Miami (24), Palmetto Bay (5), and Homestead (3). No company within 90 miles of Cutler Bay mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Publix Appliance Repair Service, around 0.4 miles out. Across 26 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Cutler Bay. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 7 |
|---|---|
| Distance to the three closest (mi) | 0.4, 1.8, 1.9 |
| With 4.5+ stars and at least 10 reviews | 15 |
| Mention Amana | 0 |
| Open on Saturdays (per listing) | 38 |
| Companies within 30 miles | 60 |
At the top of the Cutler Bay list: Applianceteck (7.1 miles away, based in Miami, 4.6 stars from 438 reviews); Los Nachos Appliance Services (2.2 miles away, based in Palmetto Bay, 5.0 stars from 219 reviews, lists Saturday hours); Glyn's Appliance Repair Service (5.1 miles away, based in Miami, 4.9 stars from 182 reviews, lists Saturday hours); Santallana Electronic,Corp (6.3 miles away, based in Miami, 4.9 stars from 62 reviews, lists Saturday hours).
Know Your Amana Washer
What Makes Amana Washer Repairs Different
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Error Codes
| Code | What it means |
|---|---|
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Keeping a Amana Washer Running
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Cutler Bay
Most washer calls in Cutler Bay come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Before You Book in Cutler Bay
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Amana washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
Amana Washer Repair FAQs: Cutler Bay, FL
How do I get rid of a washer mildew smell?
Is my Amana washer worth repairing?
Why is my washer leaking?
What should I do about a Amana error code?
More Washing Machine Repair in Cutler Bay, FL
More Amana Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.