Amana owners in Mill Valley usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Mill Valley, with those that mention Amana first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Washer Repair Near Mill Valley
Our data shows 40 appliance repair companies inside a 30-mile radius of Mill Valley. 5 of them are based in Mill Valley itself, and other nearby bases include San Francisco (11), San Rafael (10), and Richmond (5). None of the repair companies near Mill Valley name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Appliance Home & Commercial Services is the nearest, roughly 0.2 miles from Mill Valley. Rated companies nearby average 4.8 stars across 27 businesses.
Companies are shown by relevance and distance from Mill Valley. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 60 |
|---|---|
| Distance to the three closest (mi) | 0.2, 0.9, 1.0 |
| With 4.5+ stars and at least 10 reviews | 21 |
| Listing Saturday hours | 41 |
| Mention Amana | 0 |
| Name washers or washing machines in their listing | 15 |
First up for Mill Valley: FixWell Appliance Repair (4.5 miles away, based in San Rafael, 4.9 stars from 100 reviews); UniFix Appliance Repair (4.6 miles away, based in San Rafael, 4.9 stars from 94 reviews, lists Saturday hours); Smart Solution Appliances (9.3 miles away, based in San Francisco, 4.9 stars from 138 reviews, lists Saturday hours); All State Appliance Repair (9.4 miles away, based in San Francisco, 4.9 stars from 181 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
How Amana Washers Are Built
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Common Amana Washer Problems
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Amana Washer Error Codes
| Code | What it means |
|---|---|
| Sud / Sd | There are too many suds, and the washer adds rinsing to clear them. Source: Amana - Error Codes in Front Load Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Owner Care for Amana Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
What Amana Washer Repairs Cost
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Mill Valley Owners Should Know
Most washer calls in Mill Valley come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Questions to Ask a Mill Valley Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Amana Washer Repair FAQs: Mill Valley, CA
Is my Amana washer worth repairing?
Where is the water under my washer coming from?
What stops a washer from spinning?
Other Washer Repair in Mill Valley
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.