Most Amana washer repairs in King City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The King City list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Amana. Listed companies are independent technicians who repair Amana washers and other brands.
Independent Amana Washer Technicians, King City CA
We found 22 appliance repair companies within 60 miles of King City. Other nearby bases include Salinas (8), Pacific Grove (3), and Watsonville (3). The farthest listed company is about 60 miles out. Nearest on the list: Andersen Appliance, around 18.3 miles out. No company within 90 miles of King City mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 19 rated companies in range average 4.5 stars. Because the nearest shops are farther out, ask each company whether King City is inside its regular service area.
Companies are shown by relevance and distance from King City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 18.3, 40.8, 41.9 |
|---|---|
| Listing Saturday hours | 12 |
| Name washers or washing machines in their listing | 4 |
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 8 |
| Appliance repair companies in range (60 mi) | 22 |
The leading options for King City are Golden State Appliance Repair (51.9 miles away, based in Pacific Grove, 4.9 stars from 208 reviews); Sears Appliance Repair (45.1 miles away, based in Salinas, 4.7 stars from 338 reviews, lists Saturday hours); Sears Appliance Repair (44.5 miles away, based in Salinas, 4.6 stars from 115 reviews, lists Saturday hours); Fuse HVAC & Appliance Repair Monterey (51.8 miles away, based in Pacific Grove, 4.9 stars from 696 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| rL / F34 | Front load: items were left in the drum during the Clean Washer cycle. Source: Amana - Error Codes in Front Load Washers |
Signs Your Amana Washer Needs a Technician
- Water on the floor under or in front of the washer
- An error code on the display
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a King City Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What King City Owners Should Know
Most washer calls in King City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
How to Choose a Washing Machine Technician Near King City
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Amana washers, and how quickly can you get parts?
Amana Washer Repair FAQs: King City, CA
Where is the water under my washer coming from?
What should I do about a Amana error code?
How do I get rid of a washer mildew smell?
Related Repair Pages for King City
Amana Washer Repair Near King City
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.