Most Amana washer repairs in Culver City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Culver City, with those that mention Amana first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Washers Near Culver City
We found 40 appliance repair companies within 30 miles of Culver City. 5 list an address in Culver City, and the rest are spread across Los Angeles (12), Beverly Hills (11), and Santa Monica (4). None of the repair companies near Culver City name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Ready Appliance Repair Culver is the nearest, roughly 0.8 miles from Culver City. Across 36 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Amana | 0 |
|---|---|
| Listing Saturday hours | 49 |
| Repair companies inside 30 miles | 60 |
| Mention washer work | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 25 |
| Distance to the three closest (mi) | 0.8, 1.2, 1.3 |
At the top of the Culver City list: WEST APPLIANCE SERVICE (4.3 miles away, based in Playa Del Rey, 4.8 stars from 191 reviews, lists Saturday hours); MGM Appliance Repair (2.5 miles away, based in Los Angeles, 4.8 stars from 63 reviews, lists Saturday hours); JennAir Appliance Repair (2.5 miles away, based in Los Angeles, 4.7 stars from 39 reviews, lists Saturday hours); Santa Monica Appliance Repair Services (4.4 miles away, based in Santa Monica, 4.7 stars from 82 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
What Amana Says to Check First
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
What Gets Fixed on a Culver City Washer Call
Care Amana Recommends for Its Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Amana Washer Repair Cost Ranges
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Culver City Owners Should Know
Most washer calls in Culver City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
How to Choose a Washing Machine Technician Near Culver City
- How often do you repair Amana washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Amana Washer Repair FAQs: Culver City, CA
How do I get rid of a washer mildew smell?
Should I repair or replace my Amana washer?
Do you work for Amana?
Where is the water under my washer coming from?
Related Repair Pages for Culver City
Amana Washer Repair in Nearby Cities
Nearby Towns Served From Culver City
The technicians listed for Culver City also cover smaller towns nearby, including Ladera Heights and Marina del Rey. If you are in one of them, the companies above are your closest Amana washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.